Program your RT95 from the browser.
Rigbench is a free programmer for the Retevis RT95, Anytone AT-778UV and CRT Micron UV. Mac, Linux or Windows, in Chrome or Edge, with the programming cable you already have. Nothing to install.
What it does
The same wire protocol as the factory software, with the parts it leaves out.
Read and back up
A quick read pulls channels and settings in under a minute. A Full backup captures all 16 kB of the radio's memory, including the per-unit transmitter calibration that the factory software never reads. Save it as a .bin and you can always get back.
Edit memories
200 channels with names, offsets, CTCSS and DCS tones, power and bandwidth, plus the settings block: key assignments, knob behaviour, mic keys, welcome text.
Write, then check
Only the blocks that changed are written. Every one is read back and compared before Rigbench says done, and the radio's previous contents stay one click away under Restore.
Raw view
Every region of the memory decoded: settings, model block, calibration frequencies and the power-amplifier correction curves drawn as a chart. Read-only, and interesting.
Already use CHIRP?
Keep it. CHIRP programs this family too and is the right tool for a big multi-radio channel plan. Rigbench is the one to reach for when you want nothing installed, a backup that includes the calibration, a write that is checked block by block, and the door to the firmware work. CHIRP image import is on the list.
Which radios
One hardware family under several names. Rigbench identifies the radio before it does anything.
| Radio | Status | Notes |
|---|---|---|
| Retevis RT95 | tested | Firmware V100. Read, write and restore verified on two units. |
| Anytone AT-778UV | read-only | Same hardware and protocol. Writes turn on once one has been through the test. |
| CRT Micron UV | read-only | Same family. As above. |
| Midland DBR2500 and others | unknown | Connect it and see what it reports. |
Have one of the untested ones? Take a Full backup and email the .bin and the model line from the header to david.clawson@gmail.com. That is how a radio moves to the tested row.
Where this is going
Three steps, in order. The first is done enough to use.
1. The programmer
Free, and staying free. It fixes the everyday complaint: the factory software is Windows-only and fiddly.
2. Open firmware
The control head's firmware has been reverse-engineered far enough to document its protocols and calibration. A replacement that fixes the long-standing annoyances is being built in public on the dev log.
3. The spacer
A thin add-on between the control head and the body that speaks the radio's own internal protocol, adding features without reflashing anything.